請問有關KDE 3.2的KDM的問題
Moderator: Forums Team
請問有關KDE 3.2的KDM的問題
請問有沒有人灌了KDE3.2
我現在使用KDM有問題,雖然選了要進kde-3.2或是Gnome
但是都不能進入,畫面總是暗了一下就又回KDM的畫面了
有人跟我有一樣的問題嗎?
我現在使用KDM有問題,雖然選了要進kde-3.2或是Gnome
但是都不能進入,畫面總是暗了一下就又回KDM的畫面了
有人跟我有一樣的問題嗎?
我用gdm的話就完全正常了
所以我目前都是用gdm先暫用一下
自行startx也都可以啟動kde
而問題應應該不在kde無法啟動
而是kdm無法啟動所選的session
至於/var/log/kdm.log
我也看不出所以然來
所以我目前都是用gdm先暫用一下
自行startx也都可以啟動kde
而問題應應該不在kde無法啟動
而是kdm無法啟動所選的session
至於/var/log/kdm.log
我也看不出所以然來
Code: Select all
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test11-gentoo-r1 i686 [ELF]
Build Date: 22 December 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.1.log", Time: Wed Feb 11 10:04:13 2004
(==) Using config file: "/etc/X11/XF86Config"
(WW) NV(0): Failed to set up write-combining range (0xe0000000,0x4000000)
(EE) Failed to initialize GLX extension (NVIDIA XFree86 driver not found)
Warning: font renderer for ".TTF" already registered at priority 10
Warning: font renderer for ".TTC" already registered at priority 10
Xlib: extension "GLX" missing on display ":1.0".
Xlib: extension "GLX" missing on display ":1.0".
Creating menu entries for kdm in /usr/kde/3.2/share/config/kdm/sessions...
Xlib: extension "GLX" missing on display ":1.0".
Xlib: extension "GLX" missing on display ":1.0".
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
(WW) NV(0): Failed to set up write-combining range (0xe0000000,0x4000000)
(EE) Failed to initialize GLX extension (NVIDIA XFree86 driver not found)
SetClientVersion: 0 7
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 7
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 7
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 7
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 7
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 7
後來看到還有人說用可能也可以。試試吧。至少這個方法解決了我的 kdm 的小問題。
Code: Select all
genkdmconf --no-old這個方式我也有試過,結果在kdm選session的地方不在是gnome,kde-3.2.0Si wrote:後來看到還有人說用可能也可以。試試吧。至少這個方法解決了我的 kdm 的小問題。Code: Select all
genkdmconf --no-old
變成了了KDM,GNOME,WDM(我跟本沒裝)
我完全找不到設session的地方
而且我也把另一台可以正確使用kdm的gentoo裡的/usr/kde/3.2/share/config
抓回來置換,結果還是不行
怎麼會看不出個所以然?要專心呦!...
是出在 NVIDIA XFree86 driver 的載入。
Code: Select all
(==) Using config file: "/etc/X11/XF86Config"
(WW) NV(0): Failed to set up write-combining range (0xe0000000,0x4000000)
(EE) Failed to initialize GLX extension (NVIDIA XFree86 driver not found) -- Fire --
Public key: http://kiosk.feuer.idv.tw/www/feuer_kiosk_pub_key.asc
Public key: http://kiosk.feuer.idv.tw/www/feuer_kiosk_pub_key.asc
我目前的情況,KDM畫面可以出來,在輸入id及passwd後選login無法入我所選的session,但是用GDM則可以正確的進入我所選的session, gnome及kde,所以我才沒有沒有特別去注意這一個訊息,但是為了慎重起見,我把nvidia的driver拿掉(XF86Config), 換成nv,KDM依然無法載入我所選的session(如gnome, kde-3.2.0)feuer wrote:怎麼會看不出個所以然?要專心呦!...是出在 NVIDIA XFree86 driver 的載入。Code: Select all
(==) Using config file: "/etc/X11/XF86Config" (WW) NV(0): Failed to set up write-combining range (0xe0000000,0x4000000) (EE) Failed to initialize GLX extension (NVIDIA XFree86 driver not found)
我把新的log再貼出來
Code: Select all
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.1-gentoo-r1 i686 [ELF]
Build Date: 16 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb 20 08:44:59 2004
(==) Using config file: "/etc/X11/XF86Config"
Warning: font renderer for ".TTF" already registered at priority 10
Warning: font renderer for ".TTC" already registered at priority 10
Creating menu entries for kdm in /usr/kde/3.2/share/config/kdm/sessions...
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
Creating menu entries for kdm in /usr/kde/3.2/share/config/kdm/sessions...
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
GDM 可進,KDM 不行,不知是否是啟動的 script 不一樣?
我這邊(Mandrake),兩者都是用 /etc/X11/xdm/Xsession 啟動 session 的,
/usr/share/config/kdm/kdmrc :
/etc/X11/gdm/Sessions/GNOME :
不知您是否有改過 kdmrc 內容?
還有,印象中,這個 kdmrc 裡:
這個GiveConsole 是蠻重要的。
我這邊(Mandrake),兩者都是用 /etc/X11/xdm/Xsession 啟動 session 的,
/usr/share/config/kdm/kdmrc :
Code: Select all
[X-*-Core]
AllowNullPasswd=false
AllowRootLogin=false
AllowShutdown=None
AutoReLogin=false
Reset=
Resources=/etc/X11/xdm/Xresources
Session=/etc/X11/xdm/Xsession
Setup=
Startup=
SystemPath=/usr//bin:/sbin:/usr/sbin:/bin:/usr/bin::/usr/local/bin
UserPath=/usr//bin:/bin:/usr/bin::/usr/local/binCode: Select all
#!/bin/sh
exec /etc/X11/xdm/Xsession GNOME還有,印象中,這個 kdmrc 裡:
Code: Select all
[X-:0-Core]
Authorize=true
AutoLogin1st=true
AutoLoginEnable=false
AutoLoginUser=feuer
Reset=/etc/X11/xdm/TakeConsole
Setup=/etc/X11/xdm/Xsetup_0
Startup=/etc/X11/xdm/GiveConsole-- Fire --
Public key: http://kiosk.feuer.idv.tw/www/feuer_kiosk_pub_key.asc
Public key: http://kiosk.feuer.idv.tw/www/feuer_kiosk_pub_key.asc
