xine全螢幕有問題,setup鈕無法作用

找不到Code如何播放,不知道要用什麼播放程式等等相關問題都可以在這發問

Moderator: Forums Team

Post Reply
betaparticle
Posts: 312
Joined: Thu Jan 01, 2004 12:46 pm

xine全螢幕有問題,setup鈕無法作用

Post by betaparticle »

各位好,我想用xine來播放DVD。
但是我emerge xine-ui之後,雖然可以看,但只能在小畫面看。如果我開到全螢幕,叫出控制器會被影片畫面擋在後面,用右鍵叫出來的功能表,也被擋在後面(也就是看不到,但是可以功能正常,我可以按一下右鍵,按六下tab,再按enter來切換full screen/window,但就是看不到功能表)。
另外,我也無法按控制器上的setup鈕,一按就當掉。
我用knoppix來測試我的硬體,是正常可用的。
我也把knoppix裡面,XF86Config、xine的config拿來試,也是沒有用。
我想,可能是我某個設定的問題,因為我找了很久的google,只有很少數的文章有提到這個問題。而且,找不到解答。
可否請各位大大,如果您的硬體跟我差不多,且xine能正常的正常工作的,提供你們的設定給我參考好嗎?
或是你們有任何方向可供我去追查的,也請你們不吝指教。
謝謝。

我遇到的錯誤訊息

Code: Select all

gentoo root # xine
This is xine (X11 gui) - a free video player v0.9.22.
(c) 2000-2003 The xine Team.
Built with xine library 1.0.0 (1-rc2)
Found xine library version: 1.0.0 (1-rc2).
XServer Vendor: Gentoo Linux (XFree86 4.3.0, revision r3). Release: 40300000,
        Protocol Version: 11, Revision: 0,
        Available Screen(s): 1, using 0
        Depth: 16.
        XShmQueryVersion: 1.1.
-[ xiTK version 0.10.5 [XMB]]-
-[ xiTK will use XShm ]-
-[ WM type: (EWMH) Metacity {Metacity} ]-
Display is not using Xinerama.
deinterlace: Greedy disabled: required CPU accelleration features unavailable.
deinterlace: Greedy2Frame disabled: required CPU accelleration features unavailable.
deinterlace: Vertical disabled: required CPU accelleration features unavailable.main: probing <aadxr3> video output plugin
main: probing <dxr3> video output plugin
dxr3_scr: Failed to open control device /dev/em8300-0 (No such file or directory)
main: probing <xv> video output plugin
main: probing <SyncFB> video output plugin
video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb")
main: probing <aa> video output plugin
main: probing <xshm> video output plugin
main: probing <alsa> audio output plugin
load_plugins: failed to load audio output plugin <alsa>
main: probing <oss> audio output plugin
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
video_out_xshm: tried to set unsupported property 2
xine: image.c:361: xitk_image_create_image: Assertion `im && width && height' failed.
Aborted

我的硬體是
celeron 333MHz
ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] rev 65


另,我上次也問了 一次,可是文章好像被刪掉了。不曉得是哪裡有問題,是我問錯版了嗎?還是違反什麼規定?
betaparticle
Posts: 312
Joined: Thu Jan 01, 2004 12:46 pm

Post by betaparticle »

嗯,經過了這麼久,我終於找到了令我滿意的答案了。

右鍵功能在全螢幕時會被擋住,據在forums.gentoo.org的大大說的,應該是gnome預設的window manager(MetaCity)的問題,只要換成其他的window manager(如 icewm, sawfish)就沒有這個問題了。

關於一按setup就會當掉,看起來是xine-ui-0.9.22的問題。
因為我用xine-ui-0.9.21就完全沒有問題。
也許是有像我這樣問題的人太少了,曾經在mail list裡有看到有人提出跟我一樣的問題,但因為sponsor無法複製一樣的錯誤,所以該issue就被close了。我想也因此沒有人對0.9.22這個版本做patch來修正。

anyway,如果不小心真的有人跟我一樣,發生了相同的事情,不用找到google去了,把該換的換掉,你就出運了。
Post Reply