無法進入XFCE

aroma · Post by **aroma** » Mon Apr 19, 2004 12:51 am

請問小弟在安裝好xfree.XFCE後startx卻出以下訊息而無法
進入XFCE

XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.25-gentoo-r1 i686 [ELF]
Build Date: 18 April 2004
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 19 08:48:35 2004
(==) Using config file: "/etc/X11/XF86Config"
Using vt 7
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Required symbol GlxSetVisualConfigs from module /usr/X11R6/lib/modules/drivers/sis_drv.o is unresolved!

Fatal server error:
Some required symbols were unresolved


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

不知哪出錯了謝謝

aroma · Post by **aroma** » Mon Apr 19, 2004 12:25 pm

我重設xfree也是一樣出現

Code: Select all

XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.25-gentoo-r1 i686 [ELF]
Build Date: 18 April 2004
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 19 20:23:48 2004
(==) Using config file: "/etc/X11/XF86Config"
Using vt 7
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Required symbol GlxSetVisualConfigs from module /usr/X11R6/lib/modules/drivers/sis_drv.o is unresolved!

Fatal server error:
Some required symbols were unresolved


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.

找半天不知哪出錯了,麻煩大家了謝謝

Post by **scsi** » Mon Apr 19, 2004 7:02 pm

請檢查一下 /etc/ld.so.config 是否有包含該 .o 的所在路徑
也許問題是出在這裡

aroma wrote:我重設xfree也是一樣出現

Code: Select all

XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.25-gentoo-r1 i686 [ELF]
Build Date: 18 April 2004
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 19 20:23:48 2004
(==) Using config file: "/etc/X11/XF86Config"
Using vt 7
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Required symbol GlxSetVisualConfigs from module /usr/X11R6/lib/modules/drivers/sis_drv.o is unresolved!

Fatal server error:
Some required symbols were unresolved


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.

找半天不知哪出錯了,麻煩大家了謝謝

syk1986 · Post by **syk1986** » Mon Apr 19, 2004 9:57 pm

你是 emerge xfce4 or xfce ？
xfce4 只要照官方設定 .xinitrc 就可以run了

xfce ( 3.x ) 我搞不定就是了哈哈

修改 :

抱歉沒看清楚如果是 xfce的問題可以換 xfce4 試試看

aroma · Post by **aroma** » Wed Apr 21, 2004 2:51 pm

謝謝大家,我改好了

Code: Select all

Driver "sis" 改"vesa"ok

還有在請教一下,我在安裝xcin時無法編譯

Code: Select all

make[3]: *** [fonetree.dat] Error 1

不知哪出錯了,謝謝

aroma · Post by **aroma** » Wed Apr 21, 2004 2:58 pm

抱歉喔再貼一些錯誤訊息

Code: Select all

make[3]: *** [cin2tab] Error 1
make[3]: Leaving directory `/var/tmp/portage/xcin-2.5.3_pre2/work/xcin/src/util/cin2tab'
make[2]: *** [subdirs] Error 2
make[2]: Leaving directory `/var/tmp/portage/xcin-2.5.3_pre2/work/xcin/src/util'
make[1]: *** [util_bin] Error 2
make[1]: *** Waiting for unfinished jobs....

Si · Post by Si » Wed Apr 21, 2004 7:32 pm

aroma wrote:謝謝大家,我改好了
Code: Select all
Driver "sis" 改"vesa"ok

這樣會犧牲不少繪圖上的效能喔！我的 notebook 就是先前用了 vesa 繪圖速度會很慢。你還是改回 sis，在 XF86Config 找找 dri，把那關掉試試（如果是開著）。我的 SiS650 就不支源 dri。還有 glx 也關掉。沒問題後再看看 glx 或 dri 能不能開。

aroma · Post by **aroma** » Wed Apr 21, 2004 7:50 pm

謝謝si兄
請問dri glx是什麼設定能說清楚一點嗎我找不到抱歉
新手

Si · Post by Si » Thu Apr 22, 2004 8:12 am

在 XF86Config 裡有這麼一段：

-------------------------------------------------------------
Section "Module"
Load "xtt"
Load "type1"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
#Load "speedo"

# This loads the GLX module
Load "glx"
Load "extmod"
Load "record"
Load "bitmap"
# This loads the DRI module
Load "dri"

EndSection
------------------------------------------------------------

把 glx 和 dri comment 掉或刪掉。再試試看，也許這樣就可以進 XFCE 了。

aroma · Post by **aroma** » Wed Apr 28, 2004 6:48 pm

小弟之前在編譯xcin時都無法編譯成功,都出現以下訊息

Code: Select all

make[3]: *** [fonetree.dat] Error 1

後小弟在xcin-2.5.3_per2.ebuild下src_compile區段
emake || die 改make || die 就編譯成功了好像多了e
還有xfree我把si兄說的方法去做,發現我要開Load "dri"
才可以入X預設沒開現在正常了謝謝