各位前輩們您好:
在我電腦上使用Firefox開啟Flash的網頁的時候只要切換到其他Task,firefox就會crash。
我想要請教的問題是:
1.去google上面查詢有一種說法是因為gcin版本太舊的問題,上面說gcin 1.3.3應該會解掉這個問題。目前我got上面查到最新的gcin版本是 1.3.1 (我用的ACCEPT_KEYWORDS="x86",所以我現在裝的是1.2.7r1),我想確認一下這是got上面最新的嗎(我每星期都有laymsn -S一次)?如果是的話,是否我只能換到scim或是手動安裝gcin才有辦法解決這個問題?
$ eix gcin
[I] app-i18n/gcin [1]
Available versions: 1.1.9 1.2.1 1.2.5 1.2.6 1.2.7 1.2.7-r1 ~1.2.8 ~1.2.9 ~1.3.1 {immqt immqt-bc qt3 xim-select}
Installed versions: 1.2.7-r1(03:25:48 PM 01/13/2008)(immqt-bc -immqt -xim-select)
Homepage: http://www.csie.nctu.edu.tw/~cp76/gcin/
Description: Another Traditional Chinese IM.
[1] /usr/local/got
2. 我是簡單的試過把gcin 刪除,killall -9 gcin,然後才跑firefox,似乎這個flash crash的問題是沒有發生,不過我不確定我的測試是不是完整,不知道各位前輩們對於crash的部份有沒有其他的方向可以參考?
ps: 根據google查到資料,我有試過把在/usr/bin/firefox加上
a.export LC_ALL=en_US
b.export unset XMODIFIERS
c.export XLIB_SKIP_ARGB_VISUALS=1
這3個方式都沒有效果
麻煩請大家幫我看一下,謝謝!
Adobe Flash Player 9.0造成Firefox crash
Moderator: Forums Team
-
jojoyakira
- Posts: 284
- Joined: Thu Mar 01, 2007 10:42 pm
- Location: kaohsiung
- $eix gcin
app-i18n/gcin [1]
Available versions: ~1.3.1 ~1.3.2 ~1.3.3 ~1.3.4 1.3.5 1.3.6 1.3.7.1 1.3.8_pre8 1.3.8_pre9 {chinese-sound filter-nobopomofo immqt immqt-bc}
Installed versions: 1.3.8_pre9(16時39分53秒 西元2007年12月24日)(-chinese-sound -filter-nobopomofo -immqt -immqt-bc)
Homepage: http://www.csie.nctu.edu.tw/~cp76/gcin/ http://cle.linux.org.tw/trac/wiki/GcinGirlForNoBopomofo
Description: Another Traditional Chinese IM.
[1] "gentoo-taiwan" /usr/portage/local/layman/gentoo-taiwan
你使用的是舊版的,請更新
[quote="jojoyakira"][list]
$eix gcin
[I] app-i18n/gcin [1]
Available versions: ~1.3.1 ~1.3.2 ~1.3.3 ~1.3.4 1.3.5 1.3.6 1.3.7.1 1.3.8_pre8 1.3.8_pre9 {chinese-sound filter-nobopomofo immqt immqt-bc}
Installed versions: 1.3.8_pre9(16時39分53秒 西元2007年12月24日)(-chinese-sound -filter-nobopomofo -immqt -immqt-bc)
Homepage: http://www.csie.nctu.edu.tw/~cp76/gcin/ http://cle.linux.org.tw/trac/wiki/GcinGirlForNoBopomofo
Description: Another Traditional Chinese IM.
[1] "gentoo-taiwan" /usr/portage/local/layman/gentoo-taiwan
[/list]
你使用的是舊版的,請更新[/quote]
請問一下我要更新哪些呢?rsync server?
我剛才重新layman -d gentoo-taiwan 再layman -a gentoo-taiwan還是一樣。
自問自答:
改make.conf中
PORTDIR_OVERLAY="/usr/local/got"
改成
PORTDIR_OVERLAY="/usr/portage/local/layman/gentoo-taiwan/"
怪不得總覺得資料好像很久沒更新了。
請問一下這樣設定對嗎?
如果沒錯的話,建議一下 http://www.gentoo.tw/proj/ebuild/ebuild.xml
上面的
"原始碼1.2: 定義 PORTDIR_OVERLAY"
要不要更新一下會不會比較好?
$eix gcin
[I] app-i18n/gcin [1]
Available versions: ~1.3.1 ~1.3.2 ~1.3.3 ~1.3.4 1.3.5 1.3.6 1.3.7.1 1.3.8_pre8 1.3.8_pre9 {chinese-sound filter-nobopomofo immqt immqt-bc}
Installed versions: 1.3.8_pre9(16時39分53秒 西元2007年12月24日)(-chinese-sound -filter-nobopomofo -immqt -immqt-bc)
Homepage: http://www.csie.nctu.edu.tw/~cp76/gcin/ http://cle.linux.org.tw/trac/wiki/GcinGirlForNoBopomofo
Description: Another Traditional Chinese IM.
[1] "gentoo-taiwan" /usr/portage/local/layman/gentoo-taiwan
[/list]
你使用的是舊版的,請更新[/quote]
請問一下我要更新哪些呢?rsync server?
我剛才重新layman -d gentoo-taiwan 再layman -a gentoo-taiwan還是一樣。
自問自答:
改make.conf中
PORTDIR_OVERLAY="/usr/local/got"
改成
PORTDIR_OVERLAY="/usr/portage/local/layman/gentoo-taiwan/"
怪不得總覺得資料好像很久沒更新了。
請問一下這樣設定對嗎?
如果沒錯的話,建議一下 http://www.gentoo.tw/proj/ebuild/ebuild.xml
上面的
"原始碼1.2: 定義 PORTDIR_OVERLAY"
要不要更新一下會不會比較好?
不是這樣的,因為你是使用layman來管理overlayzzz025 wrote: 請問一下我要更新哪些呢?rsync server?
我剛才重新layman -d gentoo-taiwan 再layman -a gentoo-taiwan還是一樣。
自問自答:
改make.conf中
PORTDIR_OVERLAY="/usr/local/got"
改成
PORTDIR_OVERLAY="/usr/portage/local/layman/gentoo-taiwan/"
怪不得總覺得資料好像很久沒更新了。
請問一下這樣設定對嗎?
如果沒錯的話,建議一下 http://www.gentoo.tw/proj/ebuild/ebuild.xml
上面的
"原始碼1.2: 定義 PORTDIR_OVERLAY"
要不要更新一下會不會比較好?
你要做的應該是在
PORTDIR_OVERLAY="xxx"
這行下面再加上
source /your/laynam/storage/path/make.conf
這個path是跟據你/etc/layman/layman.cfg裡面的設定
你不應該直接在PORTDIR_OVERLAY變數裡直接設定layman管理的overlay,這樣就失去layman的方便性了
否則你每layman -a 一個overlay你就要加一次