喵阿弄上一個禮拜了 ...
問題還是一堆,
我已經可以寫nForce2上面上Gentoo的心得感想與新手指引了 =_=
--
這件事情告訴我們不要買新玩具來讓linux跑....
我沒事用啥nForce2呀~~~
Moderator: Forums Team
noapic 顯然可以修好這個問題AndCycle wrote:網路問題還未解決 ...
超過一定量的資料後會自動被斷線 =_=
http://kerneltrap.org/node/view/2410/7100
"WTF nVidia?! Have you noticed your APIC sucks?!"
Last edited by AndCycle on Sun Mar 14, 2004 6:49 am, edited 1 time in total.
nForce搞啥...
http://www.wlug.org.nz/NForce2Notes
"Network
The network controller on nForce2 based boards only works with a binary driver called nvnet that is supplied by nvidia in the package above. This seems to work fine and gives reasonable performance.
If you're using kernel 2.6, you will have to patch the NVidia source to make nvnet run.
See also ForcedEth, a reverse engineered open source ethernet driver for the onboard NVIDIA lan.
Note with regard to network performance
Sometimes you'll notice, when doing large transfers over your LAN, that your CPU usage goes through the roof and eth0 generates up to 500,000 interrupts a second. The nvnet driver is to blame; you can either load the module with 'optimizations=1' to optimize for CPU usage instead of throughput (interestingly, this doesn't seem to affect throughput at all), or you can load forcedeth, which makes it all go away. forcedeth should be included in 2.4.24+ and is within 2.6.3+."
http://www.wlug.org.nz/NForce2Notes
"Network
The network controller on nForce2 based boards only works with a binary driver called nvnet that is supplied by nvidia in the package above. This seems to work fine and gives reasonable performance.
If you're using kernel 2.6, you will have to patch the NVidia source to make nvnet run.
See also ForcedEth, a reverse engineered open source ethernet driver for the onboard NVIDIA lan.
Note with regard to network performance
Sometimes you'll notice, when doing large transfers over your LAN, that your CPU usage goes through the roof and eth0 generates up to 500,000 interrupts a second. The nvnet driver is to blame; you can either load the module with 'optimizations=1' to optimize for CPU usage instead of throughput (interestingly, this doesn't seem to affect throughput at all), or you can load forcedeth, which makes it all go away. forcedeth should be included in 2.4.24+ and is within 2.6.3+."
Re: 我沒事用啥nForce2呀~~~
我買了一塊有 DVI 的便宜的 Redaon 9200 顯示卡，AndCycle wrote:這件事情告訴我們不要買新玩具來讓linux跑....
果然也是一堆狀況，幸好，vesa mode 勉強可跑。
-- Fire --
Public key: http://kiosk.feuer.idv.tw/www/feuer_kiosk_pub_key.asc
Public key: http://kiosk.feuer.idv.tw/www/feuer_kiosk_pub_key.asc
