Page 1 of 1
Posted: Wed Aug 02, 2006 11:26 pm
by mihuang
Dear all :
I removed Windows all,and reinstalled Gentoo.But,I encountered a problem--I can't use SCIM as the default Chinese input method.
I set the following in ~/.bashrc :
*********************************
LANG="zh_TW.UTF-8" scim -d
export XIM=SCIM
export XIM_PROGRAM=SCIM
export XMODIFIERS=@im=SCIM
export GTK_IM_MODULE=scim
*********************************
After login process,I got nothing like before--it would automatically be
launched and was seen in system tray,without having to open a terminal,such as xterm.
when I tried to open a terminal,this is what I see :
********************************************
Smart Common Input Method 1.4.4
Launching a SCIM daemon with Socket FrontEnd...
Loading simple Config module ...
Creating backend ...
Loading socket FrontEnd module ...
Starting SCIM as daemon ...
Launching a SCIM process with x11...
Loading socket Config module ...
Creating backend ...
Loading x11 FrontEnd module ...
GTK Panel of SCIM 1.4.4
(scim-panel-gtk:18970): Pango-WARNING **: Error loading GPOS table 4097
Starting SCIM as daemon ...
SCIM has been successfully launched.
*********************************************
Though it is successfully launched,I still got nothing at all.
I really don't get along well with Gentoo recently.
Posted: Thu Aug 03, 2006 11:36 am
by scsi
建義將
Code: Select all
GTK_IM_MODULE=scim
QT_IM_MODULE=scim
XIM=SCIM
XIM_PROGRAM=SCIM
XMODIFIERS=@im=SCIM
xinput=scim
放於/etc/profile之中
Code: Select all
[ebuild R ] app-i18n/scim-1.4.4 USE="gtk immqt-bc -doc -immqt" 0 kB
[ebuild R ] app-i18n/scim-tables-0.5.6-r1 USE="kde nls" LINGUAS="-am -ar -bn -gu -hi -ja -kn -ko -ml -ne -pa -ru -ta -te -th -vi -zh" 0 kB
這樣應該就能正確的支援gtkimm及qtimm了
要再加上XIM就將scim -d加到X開始會啟動的script裡
如ebuild建議的 .gnomerc or .xinitrc
我本身使用KDE + skim
只有profile環境變數的設定外，不需再做額外的設定就能正常的使用skim了
Posted: Thu Aug 03, 2006 6:21 pm
by mihuang
Dear SCSI :
I did what you told me,but nothing happened...
Posted: Thu Aug 03, 2006 6:30 pm
by mihuang
And,more over,I could not use xcin,gcin either.When I executed xcin or
gcin,nothing happened.
Posted: Fri Aug 04, 2006 11:36 am
by scsi
gtk2的程式可以在可打字的區域上按右鍵選輸入法
你可以選得到嗎？
你試著在開gnome-console
然後輸入
看看結果為何
Posted: Fri Aug 04, 2006 4:28 pm
by mihuang
Yes,I could use scim with gtk package,such as gedit.
Posted: Sun Aug 06, 2006 11:27 pm
by mihuang
Dear all :
I have tried many many methods I know and tried many times,I still
could not use scim with packages excluding gtk-based ones.
The following keeps appearing :
*****************************************
(scim-panel-gtk:10089): Pango-WARNING **: Error loading GPOS table 4097
*****************************************
What on earth does it mean ? I never saw it before.
Posted: Sat Aug 12, 2006 10:02 am
by 【Palatis】
阿... 我到現在才看到...
I set the following in ~/.bashrc :
= =
你改放到 ~/.xprofile 裡面吧... 以下是我的 ~/.xprofile
Code: Select all
#!/bin/bash
export GTK_USE_XFT="1"
export MOZ_DISABLE_PANGO="1"
# locale variables
export LANG="zh_TW.UTF-8"
# input method
export XMODIFIERS=@im=SCIM
export GTK_IM_MODULE="scim"
export QT_IM_MODULE="scim"
exec scim -d &
Posted: Sun Aug 13, 2006 11:46 am
by mihuang
感謝Palatis!!!
終於恢復正常了。可否說明一下為何與之前設定處不同？
Posted: Fri Aug 25, 2006 9:52 pm
by 【Palatis】
~/.bashrc 是 bash 載入時讀取的設定檔.
~/.xprofile 是 X 載入時 (xinit 或 {[xgk]dm,entrance}) 讀取的設定檔.
也許有時候從 console 執行 startx 與使用圖形登入介面需要載入不同的設定檔, 那就要使用不同的檔案.
~/.xprofile - 不管怎樣都會在入
~/.xinitrc - 從 console 執行時載入
~/.xsession - 從圖形登入介面時載入
不過不管怎樣, 跑 X 的時候都跟 bash 無關的!
Posted: Sat Aug 26, 2006 9:37 pm
by mihuang
太感謝了。原來門道如此，卻是我只會看熱鬧。
不過另有個問題，為何以前我放在.dmrc或者.bashrc是可行的？
再者，用了你說的方式，固然scim-chewing可用了，卻發生Acrobat Reader，Realplayer，gnome-cups-manager無法執行。如果在console
以command-line執行，必定會先看到scim-chewing在執行並且失敗的訊息(更怪的是，scim-chewing依然可以使用)，再來就一切停止了。訊息最後一行如下(之前也貼出過)：
*****************************************
(scim-panel-gtk:10089): Pango-WARNING **: Error loading GPOS table 4097
*****************************************
網路上有文章指出scim會造成衝突，所以我試著將scim-chewing移除，
也刪除相關檔案，結果除了Realplayer恢復正常，其他依然故我。
然後我又好奇地將scim-chewing安裝回去，結果是Realplayer不受影響，
可用。而另外二個還是不行。真是怪上有怪，不知Palatis能解否？
Posted: Sun Aug 27, 2006 3:13 am
by 【Palatis】
不知道說... 我的沒問題耶 @@
如果是這樣... 請先...
1. 先把 .xprofile 裡面的 scim -d 註解一下
2. 進入 gnome (或其他 dm) 以後
2a. 開一個終端機, 執行 scim -d
2b. 再開一個終端機, 執行 realplay (或 acroread, 或 gnome-cups-manager)
3. 看看他們說什麼...
另外, 那個 Pango warning 沒關係.
Posted: Sun Aug 27, 2006 8:37 pm
by mihuang
按照你方式在console執行scim -d之後：
1,gnome-cups-add結果如下：
(gnomesu:8229): libglade-WARNING **: could not find signal handler 'on_gtk_command_textbox_activate'.
(gnomesu:8229): libglade-WARNING **: could not find signal handler 'on_gtk_password_textbox_activate'.
(gnomesu:8229): libglade-WARNING **: could not find signal handler 'on_gtk_ok_button_clicked'.
(gnomesu:8229): libglade-WARNING **: could not find signal handler 'on_gtk_cancel_button_clicked'.
(gnomesu:8229): libglade-WARNING **: could not find signal handler 'quit_program'.
** (gnomesu:8229): WARNING **: xsu.c:582: icon was not found cannot be found
(gnomesu:8229): Pango-WARNING **: Error loading GPOS table 4097
2,acroread結果如下：
/opt/bin/acroread: line 924: unexpected EOF while looking for matching ``'
/opt/bin/acroread: line 945: syntax error: unexpected end of file
Posted: Mon Sep 04, 2006 7:45 pm
by pchang
關於acroread的問題，似乎出在編碼上。只要編輯acroread的執行檔(可能在/opt/Acroread或/usr/bin)，你會看到第13行在ST_COMMENT_WORD後面有一個"`"號；它導致shell script parse不過。把"`"拿掉就沒問題了。
另外，印象中最新版的acroread沒有這個問題。
Posted: Mon Sep 04, 2006 9:49 pm
by mihuang
感謝pchang!!!正常了。那麼我第一個問題可有答案？我還是找不到相關討論。